Senva HT1W-2EUX : Wall/Surface Mount Room Humidity/Temperature Combo Sensor, 2% rH Accuracy, Selectable Outputs: 4-20 mA, 0-5 VDC, or 0-10 VDC, 10k Type II Thermistor, Buy American Act Compliant, 7 Year Limited Warranty
Specifications:
| Power Supply | 12-30VDC/24VAC (1), 100mA max. |
| RH% Output | 3-wire 0-5, 10VDC, 4-20mA, or 2-wire 4-20mA(selectable) |
| Temperature Output | 10k Type II Thermistor |
| Media filter | PTFE membrane, IP54 protection |
| Relative Humidity | |
| Accuracy | 2% models: ±2% max 0 to 100% RH |
| Hysteresis | ±0.8%RH |
| Non-Linearity | factory linearized <1%RH |
| Temperature coefficient | fully compensated by on-board temp sensor |
| Response time (2) | 8s |
| Output update rate | 0.5s |
| Operating range | 0 to 100%RH (non-condensing) |
| Long term drift | <0.25%RH per year |
| Normal Operating conditions (3) | 41 to 140°F (5 to 60°C) @ 20 to 80%RH |
Datasheets
 | Senva HT1R Humidity/Temperature Recessed Data Sheet |
| Senva HT1R Humidity/Temperature Recessed Installation Sheet |
| Senva Made In USA Certificate 2023 |
- Sensor Type:
- Wall Mount
- Temperature Element:
- 10K Type II
- Supported Protocols:
- None
- Humidity Element:
- 2%
- CO2 Element:
- None
- Setpoint:
- No Setpoint
- Override:
- No Override
- Display:
- No Display
- Material:
- Plastic
