null Skip to main content
Senva P5-0501-1XX : Universal Differential Pressure Transmitter, Select Range (Uni/Bi): 0-5"(0.5/1.0/2.5/5.0"), Select Outputs: 4-20 mA, 0-5 VDC, or 0-10 VDC, Auto-Zero, No Probe, Buy American Act Compliant, 7 Year Limited Warranty

Senva P5-0501-1XX P5 Universal Dry Pressure Transmitter, 0-5 in WC Base with 4 Selectable Sub-Ranges, Field-Selectable Output (4-20mA/0-5V/0-10V), Uni or Bi-Directional, +/-1.00% Accuracy, BAA Compliant, Made in USA

Senva

MSRP: $256.39
$113.21
(You save $143.18 )
(No reviews yet) Write a Review
SKU:
P5-0501-1XX
Condition:
New
Availability:
Ships in 1-2 Days
Adding to cart… The item has been added
Base Range0-5 in WC
Sub-Ranges4 Selectable
DirectionUni or Bi (Switch)
Output Signal4-20mA (2W/3W), 0-5V, 0-10V
Accuracy+/-1.00% of range
DisplayNo Display
Duct ProbeNot Included
OriginMade in USA

The Senva P5-0501-1XX is part of the Senva P5 Series Universal Dry Pressure Transmitter family - the multi-configuration unit in Senva's dry-pressure lineup. One SKU replaces multiple fixed-range transmitters in your stock: this unit's 0-5 in WC base scales to four selectable sub-ranges (settable via internal slide switch), with field-selectable output signal (4-20 mA 2-wire loop, 4-20 mA 3-wire, 0-5 VDC, or 0-10 VDC) and field-selectable direction (unidirectional or bidirectional). Built around a MEMS silicon piezoresistive sensor with non-position-sensitive design, manual or contact-closure auto-zero, and a patented enclosure with high-density DIN-rail mount and 3/8 in conduit-ready entry. This SKU is the bare configuration (no LCD, no probe). Add the optional RP-6 6-inch remote probe separately if you need in-duct or remote mounting.

Universal = Inventory Reduction. The P5 is engineered to replace multiple fixed-range transmitters with a single stocking SKU. One technician visit, one part number on the truck - field-set the range, the output signal, and the direction to match the application. Eliminates call-backs caused by stocking the wrong range or output type, and reduces purchasing complexity for OEM and BAS contractors managing many sites.
Best for: the same 0-5 in WC range as the -0500 but with alternative sub-ranges (0.5, 1.0, 2.5, 5.0 in WC) optimized for filter dP and mid-range duct measurement. The universal output and selectable sub-range make this the right pick for OEM and BAS contractors who want one part number that fits many applications across their installed base.
7-YEAR
WARRANTY
Industry-leading 7-year limited warranty. Senva backs the P5 Series electronics for seven years - significantly longer than typical 2-5 year warranties on competing pressure transmitters. ZOT Supply is an authorized Senva distributor; product ships factory-new from Beaverton, Oregon with full manufacturer warranty intact.
Buy American Act (BAA) / BABAA / TAA / ARRA Compliant. The Senva P5 Series is manufactured in the USA with over 65% domestic component cost and qualifies under Buy American Act, Build America Buy America Act (BABAA), Trade Agreements Act (TAA), and American Recovery and Reinvestment Act (ARRA Section 1605) for federal, state, and municipal procurement contracts. Senva's current Commerce Declaration (updated April 2026) is available from ZOT on request.

Key Features

Universal Output + Sub-Range

Four field-selectable output signals (4-20 mA 2-wire loop, 4-20 mA 3-wire, 0-5 VDC, 0-10 VDC) on a single internal switch. Four selectable sub-ranges on another switch. Field-selectable unidirectional or bidirectional via a third switch. One stocking SKU covers what would otherwise be 16+ fixed-range parts.

MEMS Silicon Piezoresistive Sensing

Solid-state silicon sensing element with precision factory calibration. Non-position-sensitive design - mount flat, vertical, or DIN-rail without zero shift. Thermal drift is 0.02% FSO per deg C (0.01% per deg F) referenced to 72 F. Accuracy is +/-1.00% of selected range typical.

0-5 in WC Base + Four Sub-Ranges

Base full-scale: 0-5 in WC. Selectable sub-ranges in unidirectional mode: 0.5, 1.0, 2.5, 5.0 in WC. Selectable bidirectional sub-ranges: +/-0.5, +/-1.0, +/-2.5, +/-5.0 in WC. Set via slide switches inside the enclosure - power off before changing.

Manual + Contact-Closure Auto-Zero

Front-panel pushbutton zero plus a separate remote-zero terminal that accepts a normally-open contact closure - useful for programmatic re-zeroing from the BAS. Press and hold ZERO SET for 2 seconds with no pressure applied (or with H and L ports tied together) to re-zero. Zero drift <0.004 in WC per year.

Patented DIN-Rail + Conduit-Ready Mount

Patented enclosure design with two DIN-rail orientations - back-mount for standard depth or side-mount for high-density panels. Integrated 3/8 in flex conduit cover with 3/4 in knockout means no separate fittings needed for typical commercial install.

LED Status Indication

LED indicator flashes every 5 seconds during normal operation, flashes rapidly during a 110% over-pressure event, and momentarily flashes when an auto-zero operation completes. Facilitates locating the unit in ductwork without opening the enclosure.

Selectable Sub-Ranges & Outputs

This SKU is the 0-5 in WC base unit. All field-selectable options are set with slide switches inside the enclosure. Power must be off when changing switches.

Selectable Option Available Settings
Base Full-Scale Range 0-5 in WC
Unidirectional Sub-Ranges (4) 0.5 in WC, 1.0 in WC, 2.5 in WC, 5.0 in WC
Bidirectional Sub-Ranges (4) +/-0.5 in WC, +/-1.0 in WC, +/-2.5 in WC, +/-5.0 in WC
Selection Method Internal slide switch (Pressure Range Selector)
Direction Selection Internal slide switch (Uni/Bi-Directional Selector)
Output Selection Internal slide switch (Output Type Selector): 4-20 mA 2-wire / 4-20 mA 3-wire / 0-5 VDC / 0-10 VDC

Technical Specifications

Specification Value
Model P5-0501-1XX
Series P5 Universal Dry Pressure
Base Pressure Range 0-5 in WC
Selectable Sub-Ranges (Uni) 0.5 in WC, 1.0 in WC, 2.5 in WC, 5.0 in WC
Selectable Sub-Ranges (Bi) +/-0.5 in WC, +/-1.0 in WC, +/-2.5 in WC, +/-5.0 in WC
Direction Field-selectable (Uni or Bi) via internal switch
Output Signals Field-selectable: 4-20 mA 2-wire loop / 4-20 mA 3-wire / 0-5 VDC / 0-10 VDC
Supply Voltage 12-30 VDC or 24 VAC (+/-10%), 30 mA max
Accuracy +/-1.00% of selected range (combined non-linearity, hysteresis, and repeatability at 70 F)
Sensor Type MEMS silicon piezoresistive, precision calibrated
Zero Function Pushbutton + N.O. contact-closure auto-zero
Zero Tolerance Included in accuracy specification
Span Tolerance +/-1.00% (+/-1% +/-0.005 in WC for ranges under 0.10 in WC)
Zero Drift (1 year) 0.004 in WC/year max (0.4% for units over 0.5 in WC)
Thermal Shift 0.02% FSO per deg C (0.01% FSO per deg F), measured from 22 C (72 F)
Response Rate 8 seconds (full scale)
Overpressure 41.5 in WC
Max Static Line Pressure 41.5 in WC
Burst Pressure 83 in WC
Position Sensitivity Non-position sensitive
Operating Temperature -4 to 140 F (-20 to 60 C)
Compensated Temperature -4 to 140 F (-20 to 60 C)
Operating Humidity 0 to 95% RH, non-condensing
Media Compatibility Dry, oil-free air or nitrogen (N2)
Display None (LED status only)
Duct Probe Not included (optional RP-6 remote probe available)
Enclosure Material UL94-5VB rated, ABS
Enclosure Rating NEMA 1
Conduit Entry 3/8 in flex conduit cover with 3/4 in knockout (integrated)
Tubing Connection Hose barbs, accepts 1/8 in and 1/4 in ID tubing
DIN Rail Mounting Back or side (two orientations) - patented design
Terminal Torque 3.5 in-lb
Dimensions 4.75 x 1.82 x 0.90 in (transmitter); 5.16 x 1.82 x 0.90 in with display variant
Weight 0.22 lb
Compliance CE, RoHS
Procurement Compliance Buy American Act (BAA), BABAA, TAA, ARRA Section 1605
Country of Origin Made in USA - Beaverton, Oregon (over 65% domestic component cost)
Warranty 7-year limited (electronics)
Manufacturer Part Number P5-0501-1XX

Documentation

PDFP5 Series DatasheetPDFInstallation Instructions (152-0350-0G)PDFEngineering SpecificationsPDFBAA / BABAA / TAA / ARRA Declaration (2026)PDFMade in USA Certificate (2023)PDFDry-Pressure Hose Length Application Note

Frequently Asked Questions

What sub-ranges and outputs does the P5-0501-1XX support?
This is the 0-5 in WC base unit. Inside the enclosure are slide switches that let you field-select the sub-range (4 unidirectional options: 0.5, 1.0, 2.5, 5.0 in WC, or 4 bidirectional options: +/-0.5, +/-1.0, +/-2.5, +/-5.0 in WC) and the output signal (4-20 mA 2-wire loop, 4-20 mA 3-wire, 0-5 VDC, or 0-10 VDC). Direction (uni or bi) is a separate switch. Power off the unit before changing any switch positions; new settings don't take effect until power is cycled.
How is the P5 different from the P4 Series?
The P5 is the Universal version of Senva's dry-pressure family. Where the P4 uses fixed ranges and fixed outputs (one SKU per range/output combination), the P5 lets you field-select the sub-range, the output signal, and the direction on a single unit. This means one P5 SKU can replace multiple P4 SKUs in inventory and on the truck. The trade-off: the P5 carries a +/-1.00% accuracy spec (vs the P4 Precision option at 0.25% or 0.50% NIST). Pick the P5 when inventory flexibility matters; pick a P4 Precision when documented NIST accuracy is required.
How do I wire the output signal?
Three terminals plus a remote-zero contact terminal. For 4-20 mA 2-wire loop: connect supply (12-30 VDC) and the 4-20 mA receiver in series through PWR and COM. For 4-20 mA 3-wire: PWR to supply +, COM to supply common, and the 4-20mA 3-Wire Out terminal to the receiver. For 0-5 VDC or 0-10 VDC: PWR, COM, and the 0-5/10V Out terminal. The Remote Zero terminal accepts a dry (N.O.) contact closure to trigger an auto-zero remotely. Tighten terminals to 3.5 in-lb. For 24 VAC supply, Senva recommends a dedicated isolation transformer since one side of the secondary ties to signal common.
Does this SKU have a display?
No - this is the no-display variant. The LED status indicator is still present (power heartbeat, auto-zero complete, 110% over-pressure flash) and visible through the enclosure. If you need on-board pressure readout for commissioning or troubleshooting, see the LCD variant P5-0501-1LX at the same base range and probe configuration.
How do I install this for duct-static measurement?
Two options. First: order the optional Senva RP-6 6-inch remote probe (sold separately) and run 1/8 in or 1/4 in ID tubing from the probe in the duct back to the transmitter mounted on a panel. Second: order the integrated-probe variant P5-0501-1XP at this same base range, which ships with the probe pre-fitted to the back of the enclosure. Either way, follow Senva's recommendation: form a drip-loop in the tubing (let it dip below the hose barbs) to protect the sensor from condensation. Hose length up to 75 ft is fine for dry pressure - the only effect of added length is a small response delay equal to the speed of sound through the air column.
How do I zero the transmitter and what media is it rated for?
The P5 is rated for dry, oil-free air or nitrogen (N2) only - not for wet, oily, corrosive, or particulate-laden media. To zero: with power applied and no differential pressure across the ports (or with the H and L ports temporarily tied together), press and hold the ZERO SET button for 2 seconds. The LED will flash momentarily when the operation completes. The unit also supports remote auto-zero via an N.O. contact-closure input wired to the Remote Zero terminal - useful for triggering periodic re-zero from the BAS to compensate for the long-term zero drift (typically under 0.004 in WC per year).

Brand:
Senva
Series:
P5 Universal Dry Pressure
Product Type:
Universal Dry Media Differential Pressure Transmitter
Base Range:
0-5 in WC
Range Code:
0501
Selectable Sub-Ranges (Uni):
0.5 in WC, 1.0 in WC, 2.5 in WC, 5.0 in WC
Selectable Sub-Ranges (Bi):
+/-0.5 in WC, +/-1.0 in WC, +/-2.5 in WC, +/-5.0 in WC
Number of Selectable Sub-Ranges:
8 (4 uni + 4 bi)
Direction:
Field-selectable Unidirectional or Bidirectional
Output Signal:
Field-selectable: 4-20 mA 2-wire loop / 4-20 mA 3-wire / 0-5 VDC / 0-10 VDC
Supply Voltage:
12-30 VDC or 24 VAC, 30 mA max
Accuracy:
+/-1.00% of selected range
Display:
None (LED status only)
Duct Probe:
Not included
Sensor Type:
MEMS silicon piezoresistive
Zero Function:
Pushbutton + N.O. contact-closure remote zero
Zero Drift:
0.004 in WC/year max
Thermal Shift:
0.02% FSO/C (0.01% FSO/F)
Response Rate:
8 seconds full-scale
Overpressure:
41.5 in WC
Max Static Line Pressure:
41.5 in WC
Burst Pressure:
83 in WC
Position Sensitivity:
Non-position sensitive
Operating Temperature:
-4 to 140 F, -20 to 60 C
Operating Humidity:
0 to 95% RH non-condensing
Media:
Dry oil-free air, nitrogen (N2)
Enclosure:
UL94-5VB ABS, NEMA 1
Tubing Accepted:
1/8 in and 1/4 in ID
Conduit Entry:
3/8 in flex (integrated cover with 3/4 in knockout)
DIN Rail Mounting:
Back or side (patented design)
Terminal Torque:
3.5 in-lb
Compliance:
CE, RoHS
Procurement:
Buy American Act (BAA), BABAA, TAA, ARRA Compliant
Country of Origin:
USA (Beaverton, Oregon)
Warranty:
7-year limited

Videos Hide Videos Show Videos

!