Senva PG-75SB : Stainless Steel Wet Media Gauge Pressure Sensor, +/-0.25% Accuracy, 75 PSI, 0-5VDC Output, 1/4"MNPT Fitting
The PG Series is a gauge pressure sensor designed for rugged environments specifically built to withstand various liquids and gases. The sensor ensures precise measurements of pressure, whether it is hydraulic pressure in a manifold or corrosive substances like sea water or hydrogen. The thick diaphragm of the PG series industrial pressure sensor guarantees long-term stability, ensuring reliable and consistent performance over time.
The PG Series gauge pressure sensor is constructed with a stainless steel wet media 1/4" MNPT (Male National Pipe Thread) connection. It offers two output options: 0-5VDC (Voltage Direct Current) or 4-20mA (Current Loop) outputs, providing flexibility for integration with different control systems or data acquisition devices.
Electrical Data
| Output | 4-20mA | 0-5VDC |
| Power Supply | 12-28VDC | 12-28VDC |
| Output Load | 250-500 Ohms | 5K Ohms min. |
| Current Consumption | 20mA, typical | <20mA |
Environmental Data
| Temperature | |
| Operating | -20 to 85°C (-4 to 185°F) |
| Storage | -40 to 125°C (-40 to 257°F) |
| Thermal Limits | |
| Compensated Range | 0 to 60°C (32 to 140°F) |
| TC Zero | <±1% of FS |
| TC Span | <±1% of FS |
| Other | |
| Rating | IP-65 (housing only) |
Performance @ 25°C (77°F)
| Accuracy (1) | <±0.25% BFSL |
| Stability (1 year) | ±0.25% FS, typical |
| Over Range Protection | 2X Rated Pressure |
| Burst Pressure | 5X |
| Pressure Cycles | > 100 Million |
Wiring Connections
| 0-5 VDC Models | 3-wire voltage |
| 4-20mA Models | 2-wire loop powered |
Datasheets
 | Senva PG Gauge Pressure Transducer Datasheet |
- Pressure Type:
- Single
- Media:
- Wet
- Pressure Range:
- 0-75PSI
- Output Signal:
- 0-5VDC
