The BAPI BA/QS-W-A is a BAPI-Stat Quantum Slim room temperature sensor with a 1K Platinum RTD (385 curve) in a white, low-profile enclosure. It provides a resistance output that wires to the analog input of a building automation controller over one pair of 16 to 22 AWG wires.
Best For
- Rooms that need a temperature input in a sleek, low-profile enclosure
- Locations where appearance matters as much as the temperature measurement
- Controllers with an analog input set up for a 1K Platinum RTD (385 curve)
- Spaces that call for a white wall device
Warranty
BAPI Limited Lifetime Warranty.
Key Features
Low-Profile Enclosure
BAPI-Stat Quantum Slim housing measures 1.90 x 3.75 x 1.15 in. (W x H x D) (48.3 x 95.3 x 29.2 mm).
1K Platinum RTD (385 curve)
Resistance output to the controller analog input, wired to SEN 1 and SEN 2.
White Finish
White enclosure for a clean wall appearance.
Surface or Drywall Mount
Mounts to a surface or drywall with the #6 x 1 in. mounting screws provided.
Lock-Down Cover
Cover latches at the top, snaps into place and is secured with lock-down screws using a 1/16 in. Allen wrench.
RoHS and CE
Agency approvals: RoHS, CE. Operates from 32 to 122 °F (0 to 50 °C), 0 to 95% RH non-condensing.
ZOT Supply is an authorized distributor of BAPI products.
Technical Specifications
| Manufacturer | BAPI (Building Automation Products, Inc.) |
|---|---|
| Model / MPN | BA/QS-W-A |
| Series | BAPI-Stat Quantum Slim Room Temperature Sensor |
| Sensing Element | 1K Platinum RTD (385 curve) |
| Output | Resistance output to the analog input of the controller |
| Terminals | SEN 1 and SEN 2 on the J2 terminal block |
| Wiring | One pair of 16 to 22 AWG wires |
| Recommended Field Wiring | Twisted pair, at least 22 AWG, with sealant-filled connectors |
| Enclosure Color | White |
| Mounting | Surface or drywall mount (screws provided) |
| Mounting Hardware | #6 x 1 in. mounting screws provided |
| Drywall Mounting | Two 3/16 in. holes with drywall anchors |
| Cover | Latches at the top of the base and snaps into place; secured with lock-down screws (1/16 in. Allen wrench) |
| Dimensions | 1.90 x 3.75 x 1.15 in. (W x H x D); 48.3 x 95.3 x 29.2 mm |
| Base | Closed cell foam |
| Operating Temperature | 32 to 122 °F (0 to 50 °C) |
| Operating Humidity | 0 to 95% RH, non-condensing |
| Agency | RoHS, CE |
| Warranty | Limited Lifetime Warranty |
Specifications per BAPI BAPI-Stat Quantum Slim Sensor datasheet Rev. 11/09/17 and BAPI Installation & Operations 40063_ins_quantum_slim rev. 08/21/17. Reviewed November 18, 2026.
Documentation
Frequently Asked Questions
What sensing element does the BAPI BA/QS-W-A use?
The BA/QS-W-A uses a 1K Platinum RTD (385 curve) and provides a resistance output that wires to an analog input on the building automation controller. Set up the controller input for a 1K Platinum RTD (385 curve).
How is the BAPI BA/QS-W-A wired?
Use one pair of 16 to 22 AWG wires to SEN 1 and SEN 2 on the J2 terminal block. BAPI recommends twisted pair of at least 22 AWG with sealant-filled connectors, and not running the sensor wiring in the same conduit as AC power wiring.
What are the dimensions of the BA/QS-W-A?
The BAPI-Stat Quantum Slim enclosure measures 1.90 x 3.75 x 1.15 in. (W x H x D) (48.3 x 95.3 x 29.2 mm).
How do I mount the BA/QS-W-A on drywall?
Mark the two mounting holes from the base plate, drill two 3/16 in. holes, insert drywall anchors and secure the base with the #6 x 1 in. screws provided. Latch the cover at the top, snap it down and back out the lock-down screws with a 1/16 in. Allen wrench until they are flush with the bottom of the cover.
What is the operating environment for the BA/QS-W-A?
It operates from 32 to 122 °F (0 to 50 °C) and 0 to 95% RH, non-condensing.
How do I check the BA/QS-W-A if the controller reading looks wrong?
Confirm the controller input setup and the wiring terminations, and check for drafts from the conduit. Then disconnect the sensor wires, measure the resistance across SEN 1 and SEN 2 with an ohmmeter and compare it to the BAPI temperature table for the element at the measured room temperature. A difference of more than 5% calls for BAPI technical support.
What warranty does the BA/QS-W-A carry?
BAPI covers the Quantum Slim with a Limited Lifetime Warranty.
- Sensor Family:
- Quantum Slim
- Location:
- Room
- Measures:
- Temperature
- Temperature Element:
- 1K Platinum RTD (385 curve)
- Color:
- White
- Setpoint:
- No
- Override:
- No