The Caleffi 548052A is a Hydro Separator unit providing hydraulic separation, with 2" ANSI Flange connections. It installs between the boiler circuit and the distribution circuits in hydronic heating and chilled water systems.
Best for decoupling boiler and system circuits where air and dirt separation are handled by other devices.
Specifications sourced from Caleffi NA technical literature, 2025 revisions.
Key Features
Primary/Secondary Decoupling
Hydraulically decouples boiler and system circuits so each pump sees only its own loop, eliminating flow interference without closely spaced tees.
Low-Velocity Separation Chamber
An enlarged internal chamber drops fluid velocity so entrained air rises and heavier particulate settles, both continuously removed in service.
Blowdown Drain and Air Vent
An integral brass blowdown valve clears collected sediment and an automatic air vent discharges separated air without shutting the system down.
ANSI Flanged Connections
Flanged ports simplify installation and removal on large-diameter mains and support higher flow rates.
Technical Specifications
| Connection Size | 2" |
| Connection Type | ANSI Flange |
| Connection Style | ANSI Flange |
| Separation Functions | Hydraulic separation |
| Maximum operating pressure | 150 psi |
| Medium temperature range | 32 - 220 deg F |
| Material | steel |
| Product Family | Hydro Separator |
| Shipping Weight | 75.0 lb |
Documentation
Design Resources
Related Products
- Caleffi NA548052A : Hydro Separator 2" ANSI Flange ASME
- Caleffi 548008A : Hydro Separator 2" NPT
- Caleffi 548009A : Hydro Separator 2" NPT
- Caleffi 548068A : Hydro Separator 2" Press
Frequently Asked Questions
What does Caleffi 548052A do in a hydronic system?
Caleffi 548052A provides hydraulic separation. A hydraulic separator creates a low-velocity zone between the boiler circuit and the distribution circuits so each pump operates against its own loop only, removing flow interference without relying on closely spaced tees.
What size connection does Caleffi 548052A have?
It is supplied with 2" ANSI Flange connections. Sizing should be based on system flow rate rather than pipe size alone; other sizes in the Hydro Separator family are listed under Related Products.
What is the warranty on Caleffi 548052A?
Caleffi covers this product under its standard two-year limited warranty against defects in material and workmanship from the date of purchase. ZOT Supply is an authorized Caleffi distributor.
- Product Family:
- Hydro Separator
- Separation Functions:
- Hydraulic Separation
- Connection Style:
- ANSI Flange
- Connection Type:
- ANSI Flange
- Connection Size:
- 2 inch
- ASME Code Stamped:
- No
- Max Operating Pressure:
- 150 psi
- Medium Temperature Range:
- 32 - 220 deg F
- Body Material:
- steel