ACI A/TT1K-BP-4-GD-10'CL2P : 1" Bullet Probe Temperature Transmitter, 4-20mA Output, 10' Plenum Cable, Galvanized Enclosure, Made in USA, 5-Year Warranty
The ACI Transmitter Bullet Probe Series features Zero and Span adjustments for precise field calibration and is calibrated with NIST-certified equipment. For optimal performance, we recommend using 18 to 22 AWG shielded cable in all temperature transmitter installations to minimize noise interference on signal lines.
The sensor assemblies are constructed with a two-conductor, unshielded FEP/FEP plenum-rated cable and utilize ACI’s double encapsulation process. This ensures enhanced protection against moisture and provides faster response times, thanks to high-quality, thermally conductive epoxy.
Applications:
- Roof Top Units
- Air Handlers
- Discharge Air, Supply, Return, and Mixed Air Duct Temperature
- Remote Temperature Sensing
Specifications
| Transmitter Supply Voltage | Supply Current: |
+8.5 to 32 VDC (Reverse Polarity Protected) | 25 mA minimum |
| Output Signals: | Current: 4-20 mA (2-Wire Loop Powered) | Voltage: 1-5 VDC or 2-10 VDC (3-Wires) |
| Transmitter Operating Temperature Range: | -40ºF to 185ºF (-40 to 85ºC) |
| Sensor Type: | Platinum RTD |
| Sensor Curve: | PTC (Positive Temperature Coefficient) |
| Sensing Points: | One |
| Number Wires | Wire Colors: | Two | Red and Black (Non Polarity Sensitive) |
| Sensor Operating Temperature Range: | -40 to 150ºC (-40 to 302ºF) |
| Probe Diameter | Probe Material: | 0.250” (6.35mm) | 304 Stainless Steel |
Datasheets
- Sensor Type:
- Probe Only
- Probe Length:
- 1 Inch
- Temperature Element:
- Transmitter
- Lead Length:
- 10 Foot Plenum Rated Cable
- Enclosure:
- Galvanized Steel
