Skip to main content

BAPI BA/DCD05-D-BB : Dual Channel "24/7" CO2 Duct Sensor, Field Selectable Voltage Output - 0 to 5V Default, 0 to 2,000 ppm Range, 5-Year Warranty

BAPI

MSRP: $470.00
$204.00
(You save $266.00 )
(No reviews yet) Write a Review
SKU:
BA/DCD05-D-BB
Condition:
New
Availability:
Ships 2 Weeks
Adding to cart… The item has been added

BAPI BA/DCD05-D-BB : Dual Channel "24/7" CO2 Duct Sensor, Field Selectable Voltage Output - 0 to 5V Default, 0 to 2,000 ppm Range, 5-Year Warranty

The BAPI BA/DCD05-D-BB is a dual-channel CO2 duct sensor that can be used to monitor and control ventilation in buildings. It is accurate and reliable, and it features a field-selectable voltage output, a 0 to 2,000 ppm range, and a 5-year warranty.

The sensor is optimized for continuously occupied areas and features a 3-point calibration process for enhanced accuracy and reliability. It also has a built-in barometric pressure sensor that compensates for changes in altitude and weather, ensuring accurate readings regardless of the conditions.

For 0 to 2,000 ppm units, the CO2 level is indicated as “Good, Fair or Poor” by three LEDs on the front of the unit. If the CO2 level reaches the top of the ppm range, the red LED will begin to flash.

Specifications

Power: 12 to 24 VDC, 240 mA • 18 to 24 VAC, 12 VA Peak
Field Selectable Voltage Output: 0 to 5 or 0 to 10 VDC
Termination:  3 Terminals, 16 to 22 AWG
Operating Environment: 32 to 122°F (0 to 50°C)
0 to 95%RH non-condensing
CO2 Sensing Element: Dual Channel Non-Dispersive Infrared (NDIR)
Unventilated BAPI-Box Enclosure Rating: NEMA 4, IP66
Enclosure Material: Polycarbonate, UL94 V-O
CO2 Detection Range: 0 to 2,000, 0 to 5,000 and 0 to 50,000 ppm
Start-Up Time: <2 Minutes
Response Time: <2 Minutes for 90% step change typical (after start-up)
LED CO2 Level Indicator

(0 to 2,000 ppm units only):

  • Good, Green < 1,000 ppm
  • Fair, Yellow = 1,000 to 1,500 ppm
  • Poor, Red > 1,500 ppm
CO2 Accuracy: 400 to 1,000 ppm: ±75 ppm >1,000 ppm: ±10% of reading
CO2 Drift Stability: <5% of full scale over life of product.
Agency: RoHS, CE, Title 24 Requirements
Warranty Period: 5 Years

 

Datasheets

pdf logo BAPI CO2 Duct and Rough Service Sensors, Datasheet for Submittal
pdf logo CO2 Duct and Rough Service Sensor Instructions
pdf logo Effects of Temperature and Barometric Pressure on CO2 Measurement
pdf logo Calibration Methods for Single and Dual Beam CO2 Sensors

 

Sensor Type:
Duct
Humidity Element:
None
CO2 Element:
Yes
Temperature Element:
None
Display:
No Display
VOC:
No