BAPI BA/BQX-T-A-BNK : BAPI-Stat Quantum TVOC Room Sensor, 0 to 5V Output, Standard Mounting Base, Includes Cover LEDS for Air Quality Levels of "Good", "Fair", and "Poor"
BAPI VOC Sensors Offer Insight and Improvement for Indoor Air Quality
Maintain a healthy environment and improve occupant well-being with BAPI's VOC sensors. Knowing your indoor air quality (IAQ) is crucial, and our sensors provide the critical information you need to take action.
BAPI VOC sensors:
- Measure volatile organic compounds (VOCs), commonly found indoor air pollutants that can impact health.
- Offer CO2 equivalent (CO2e) readings, simplifying interpretation and aligning with ASHRAE standards.
- Correlate VOC levels to typical CO2 concentrations (0-2,000 ppm), enabling utilization within ASHRAE's CO2-based ventilation recommendations.
- Gain valuable insights into your indoor air environment.
- Make informed decisions about improving air quality and occupant health.
- Adhere to recommended ventilation practices established by ASHRAE.
Specifications
| Power: | (Half-wave rectified) |
| TVOC Unit Detection Range: | 0 to 2,500 ppb |
| Sensing Element: | Micro-machined metal oxide |
| Start-Up Time: | 15 minutes |
| Response Time: | <60 sec (after start-up time) |
| Selectable Output: | 0 to 5 or 0 to 10 VDC > 10KΩ impedance |
| Wiring: | 3 wires, 16 to 22 AWG |
| Selectable Output: | 0 to 5 or 0 to 10 VDC > 4KΩ impedance |
| Operating Environment: | 32 to 122°F (0 to 50°C) 5 to 95%RH non-condensing |
| Enclosure Material: | ABS plastic, UL94, V-0 |
| Agency: | CE EN 61326-1:2013 EMC, UL, RoHS |
Datasheets
 | BAPI VOC Room Sensor, BAPI-Stat “Quantum”, Datasheet for Submittal |
| BAPI VOC (TVOC) Room Sensor in a BAPI-Stat Quantum |
- Sensor Type:
- Room
- Output Signal:
- 4-20mA, 0-5 VDC, or 0-10 VDC
- CO2 Element:
- None
- Humidity Element:
- None;VOC Element=Yes"
- Temperature Element:
- None
- Display:
- No Display
- Supported Protocols:
- None
