BAPI BA/TVOC10-D-BB-BNK : Duct VOC (TVOC), 0 to 10V Output, Includes Cover LEDS for Air Quality Levels of "Good", "Fair", and "Poor"
Maintaining good indoor air quality (IAQ) is crucial for your health and well-being. BAPI's VOC sensors empower you to take control of your IAQ by providing real-time, actionable data on the level of volatile organic compounds (VOCs) present in your environment.
Total VOC (TVOC) units: These units provide a comprehensive reading of the total VOC concentration (0-2,500 ppb) within your space. This data is essential for adhering to strict building certifications that require separate VOC and CO2 monitoring. While TVOC units lack status LEDs, they deliver detailed VOC concentration measurements.
BAPI offers Duct units equipped with aspiration tubes for remote VOC detection in hard-to-reach areas like ductwork.
By choosing BAPI's VOC sensors, you can:
- Gain valuable insights into your indoor air quality
- Make data-driven decisions to improve air quality and well-being
- Adhere to building certifications and ventilation guidelines
Specifications
| Power: |
(Half-wave rectified) |
| TVOC Unit Detection Range: |
0 to 2,500 ppb |
| Sensing Element: | Micro-machined metal oxide |
| Start-Up Time: | 15 minutes |
| Response Time: | <60 sec (after start-up time) |
| Selectable Output: | 0 to 5 or 0 to 10 VDC > 10KΩ impedance |
| Wiring: | 3 wires, 16 to 22 AWG |
| Operating Environment: | 32 to 122°F (0 to 50°C) 5 to 95%RH non-condensing |
| Enclosure Material: | UV-Resistant Polycarbonate, UL94, V-0 |
| Agency: | CE EN 61326-1:2013 EMC, UL, RoHS |
Datasheets
 |
BAPI VOC Duct and Rough Service Sensor, Datasheet for Submittal |
|
BAPI VOC (TVOC) Duct and Rough Service Sensor Instructions |
- Sensor Type:
- Duct
- Output Signal:
- 0-10 VDC
- CO2 Element:
- None
- Humidity Element:
- None
- VOC Element:
- Yes
- Temperature Element:
- None
- Display:
- No Display
- Supported Protocols:
- None
