BAPI BA/VOC05-D-BB : Duct VOC (CO2e), 0 to 5V Output, Includes Cover LEDS for Air Quality Levels of "Good", "Fair", and "Poor"
Maintaining good indoor air quality (IAQ) is crucial for your health and well-being. BAPI's VOC sensors empower you to take control of your IAQ by providing real-time, actionable data on the level of volatile organic compounds (VOCs) present in your environment.
CO2 equivalent (CO2e) units: These units combine the benefits of VOC sensors with the familiarity of CO2 sensors. They translate VOC readings into an equivalent CO2 level (0-2,000 ppm), enabling seamless integration with ASHRAE's CO2-based ventilation guidelines. Additionally, CO2e units feature easy-to-read LED status indicators for at-a-glance monitoring.
The Duct units equipped with aspiration tubes for remote VOC detection in hard-to-reach areas like ductwork.
By choosing BAPI's VOC sensors, you can:
- Gain valuable insights into your indoor air quality
- Make data-driven decisions to improve air quality and well-being
- Adhere to building certifications and ventilation guidelines
Specifications
| Power: | (Half-wave rectified) |
| CO2e Unit Detection Range: | 0 to 2,000 ppm CO2 equivalent |
| Sensing Element: | Micro-machined metal oxide |
| Start-Up Time: | 15 minutes |
| Response Time: | <60 sec (after start-up time) |
| Selectable Output: | 0 to 5 or 0 to 10 VDC > 10KΩ impedance |
| Wiring: | 3 wires, 16 to 22 AWG |
| Cover LEDs for CO2e Models: | Good, Green < 1,000 PPM |
| Operating Environment: | 32 to 122°F (0 to 50°C) 5 to 95%RH non-condensing |
| Enclosure Material: | UV-Resistant Polycarbonate, UL94, V-0 |
| Agency: | CE EN 61326-1:2013 EMC, UL, RoHS |
Datasheets
 | BAPI VOC Duct and Rough Service Sensor, Datasheet for Submittal |
| BAPI VOC (CO2e) Duct and Rough Service Sensor Instructions |
- Sensor Type:
- Duct
- Output Signal:
- 0-5 VDC
- CO2 Element:
- None
- Humidity Element:
- None
- VOC Element:
- Yes
- Temperature Element:
- None
- Display:
- No Display
- Supported Protocols:
- None
