The Dwyer WM2-D-C-14 is a 50 mm water meter in the Dwyer Series WM2 family. Dwyer publishes no model chart or specification table for the WM2-D variant, so the technical detail below is limited to what Dwyer states for this exact part number.
Confirmed for WM2-D-C-14: a 50 mm body size, stated in the Dwyer part description. Flow range, coupling size, thread standard, register units, register capacity, wetted materials, pressure and temperature limits, accuracy, and certifications are not published by Dwyer for the WM2-D variant. They are not carried over from the Series WM2 model charts here, because Dwyer does not state that the WM2-D shares them. Contact ZOT Supply and we will obtain written confirmation from Dwyer before you specify or order.
Safety Notice
Not for potable water use. Dwyer Series WM2 and WMT2 water meters are not approved for potable water because the brass bodies contain lead in excess of low-lead limits. Treat this variant the same way and use it on non-potable service only.
California Proposition 65 WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Technical Specifications
| Manufacturer Part Number | WM2-D-C-14 |
| Product Family | Dwyer Series WM2 water meters |
| Variant | WM2-D |
| Body Size | 50 mm |
| Published Specification Table | None issued by Dwyer for this variant |
Configuration note: Dwyer publishes no model chart for the WM2-D variant. The 50 mm body size is stated in the Dwyer part description and matches the published catalog weight, but coupling size, thread standard, register units, and all flow data are not published for this configuration and are omitted rather than estimated. Series WM2 model-chart values are NOT applied to this variant, because Dwyer does not state that the WM2-D shares them. Contact ZOT Supply and we will obtain written confirmation from Dwyer before you specify or order.
Body size for this part number is taken from the Dwyer published part description. The Series WM2 and WMT2 catalog page and Bulletin F-WM2 are linked below for the wider family; neither contains a WM2-D model chart. Verified August 2, 2026.
Documentation
Related Products
Frequently Asked Questions
What are the specifications of the Dwyer WM2-D-C-14?
Dwyer publishes a 50 mm body size for this part number and no specification table for the WM2-D variant. Flow range, coupling size, register units, and materials are not published. Contact ZOT Supply for written confirmation from Dwyer.
Is the WM2-D-C-14 the same as the WM2-B meter of the same size?
Not confirmed. The WM2-B model chart covers the B variant only. Dwyer does not state that the WM2-D shares the B variant flow data, couplings, or register, so those figures are not repeated here.
Can the Dwyer WM2-D-C-14 be used on drinking water?
No. Dwyer Series WM2 and WMT2 water meters are not approved for potable water use because the brass bodies contain lead in excess of low-lead limits.
- Type:
- Water Meter
- Series:
- WM2
- Meter Size:
- 50 mm
