Functional Devices RIBL12B : Enclosed Mechanically Latching Relay, 20 Amp Contact Rating, Relay Contact Type: SPST, 12 Vac/dc Coil Voltage, NEMA 1 Housing

Functional Devices RIBL12B : Enclosed Mechanically Latching Relay, 20 Amp Contact Rating, Relay Contact Type: SPST, 12 Vac/dc Coil Voltage, NEMA 1 Housing

Functional Devices Latching Relays are switched by pulse commands from an appropriate power source or a controller. The relay contacts are mechanically latched in position, so that the load remains in its last state (on or off) during a loss of power. A pulse of opposing polarity latches the relay in the alternate state.

Specifications

# Relays & Contact Type: One (1) SPST Latching Relay Dual Coil
Expected Relay Life: 1 million cycles minimum mechanical
Operating Temperature: 30 to 140° F
Humidity Range: 5 to 95% (noncondensing)
Operate Time: 50ms
Maximum Pulse Length: 30 seconds
Dimensions: 1.70" x 2.80" x 1.50 " with .50" NPT Nipple
Wires: 16", 600V Rated
Approvals: UL Listed, UL60947, C-UL, CE, RoHS
Housing Rating: UL Accepted for Use in Plenum, NEMA 1
Gold Flash: No

Contact Ratings:
20 Amp Resistive @ 120-277 Vac
20 Amp Ballast @ 120-277 Vac
16 Amp Electronic Ballast @ 120-277 Vac
5540WattTungsten @ 277Vac
720 VA Pilot Duty @ 120-277 Vac
2 HP @ 277 Vac
3 HP @ 240 Vac
1.5 HP @ 120 Vac

Coil Current:
182 mA @ 10 Vac 
250 mA @ 12 Vac
165 mA @ 10 Vdc
198 mA @ 12 Vdc
250 mA @ 15 Vdc

Latch / Unlatch:
Min. 10 Vdc / 11 Vac

Notes:

• Application of voltage on latch coil (Wht/Blu & Wht/Yel) will close the contact.
• Application of voltage on unlatch coil (Wht/Red & Wht/Yel) will open the contact.
• Voltage should not be applied to the coil for more than 30 seconds.

Datasheets

Functional Devices RIBL12B Specifications