Skip to main content

Functional Devices RIBL12BM : Enclosed Mechanically Latching Relay, 20 Amp Contact Rating, Relay Contact Type: SPST, 12 Vac/dc Coil Voltage, Status LED, Auxiliary Output, NEMA 1 Housing

Functional Devices

MSRP: $173.95
$86.98
(You save $86.97 )
(No reviews yet) Write a Review
SKU:
RIBL12BM
Condition:
New
Availability:
Ships in 1 Week
Adding to cart… The item has been added

Functional Devices RIBL12BM : Enclosed Mechanically Latching Relay, 20 Amp Contact Rating, Relay Contact Type: SPST, 12 Vac/dc Coil Voltage, Status LED, Auxiliary Output, NEMA 1 Housing

Functional Devices Latching Relays are switched by pulse commands from an appropriate power source or a controller. The relay contacts are mechanically latched in position, so that the load remains in its last state (on or off) during a loss of power. A pulse of opposing polarity latches the relay in the alternate state.

Specifications

# Relays & Contact Type: One (1) SPST Latching Relay Dual Coil
Expected Relay Life: 1 million cycles minimum mechanical
Operating Temperature: 30 to 140° F
Humidity Range: 5 to 95% (noncondensing)
Operate Time: 50ms
Maximum Pulse Length: 30 seconds
Relay Status / Auxiliary
Contact Closed:
 LED On = Voltage Detected on Load Wire

Dimensions: 2.30" x 3.20" x 1.80"with .50" NPT Nipple
Wires: 16", 600V Rated
Approvals: UL Listed, UL60947, C-UL, CE, RoHS
Housing Rating: UL Accepted for Use in Plenum, NEMA 1
Gold Flash: No


Contact Ratings:
20 Amp Resistive @ 120-277 Vac
20 Amp Ballast @ 120-277 Vac
16 Amp Electronic Ballast @ 120-277 Vac
5540WattTungsten @ 277Vac
720 VA Pilot Duty @ 120-277 Vac
2 HP @ 277 Vac
3 HP @ 240 Vac
1.5 HP @ 120 Vac

Coil Current:
182 mA @ 10 Vac 
250 mA @ 12 Vac
165 mA @ 10 Vdc
198 mA @ 12 Vdc
250 mA @ 15 Vdc


Latch / Unlatch: Min. 20 Vdc / 22 Vac
Auxiliary Contact: 3 Amp @ 30 Vac/dc max.

Notes:

  • Application of voltage on latch coil (Wht/Blu & Wht/Yel) will close the contact.
  • Application of voltage on unlatch coil (Wht/Red & Wht/Yel) will open the contact.
  • Voltage should not be applied to the coil for more than 30 seconds.

Datasheets

pdf logo

Functional Devices RIBL12BM Specifications

Relay Coil Voltage:
12 Vac/dc
Relays:
1
Contacts:
SPST
Override Switch:
No
Auxiliary Output:
Yes