Functional Devices RIBM013PNDC : Dry Contact Relay, 30 Amp 3PDT, Class 2 Dry Contact Input, 120 Vac Power Input, 4.00" Track Mount

Functional Devices RIBM013PNDC : Dry Contact Relay, 30 Amp 3PDT, Class 2 Dry Contact Input, 120 Vac Power Input, 4.00" Track Mount

Product Features

• Prepackaged for quick and easy installation
• Provides low-voltage (Class2) power needed to activate the relay (self-powered) by closing the dry contact input
• Activated by a wide range of dry contacts such as thermostats, switches, other relays, solid-state switches, etc.
• Power to energize the relay can be brought to the relay on a separate pair of wires along with the control output of the controller, or can be a local power source near the relay
• Relay contacts are isolated from the input power and the dry contact input, so they can be wired to switch any other power-load or low-voltage load (see specifications for contact ratings)

SPECIFICATIONS

# Relays & Contact Type: One (1) 3PDT Continuous Duty Coil
Expected Relay Life: 10 million cycles minimum mechanical
Operating Temperature: -30 to 140° F
Humidity Range: 5 to 95% (noncondensing)
Operate Time: 20ms
Relay Status: Red LED On = Activated
Power Status: Green LED On = Activated
Dimensions: 2.88”H x 4.00”W x 1.50”D1/2.00”D2
Track Mount: 4.000"
MT4 Mounting Track Sold Separately
Approvals: UL Component Recognized, UL916 C-UL, CE, RoHS
Gold Flash: No
Override Switch: No

Contact Ratings:

30 Amp Resistive @ 300 Vac
30 Amp Resistive @ 28 Vdc
15 Amp Resistive @ 600 Vac
7.5 HP @ 480 Vac, 3 Phase
5 HP @ 240 Vac, 3 Phase
3 HP @ 480-600 Vac, 1 Phase
2 HP @ 240/277 Vac, 1 Phase
1 HP @ 120 Vac, 1Phase
20 Amp Ballast @ 277-480 Vac 
Not rated for Electronic Ballast
Heavy Pilot Duty
770 VA @ 120 Vac, 1 Phase
1158 VA @ 240 Vac, 1 Phase
1109 VA @ 277 Vac, 1 Phase
1640 VA @ 480 Vac, 1 Phase
1466 VA @ 240 Vac, 3 Phase
2122 VA @ 480 Vac, 3 Phase

Power Input:
95 mA @ 120 Vac

Notes:

• Dry Contact Input Operation: Close dry contact to activate relay.
• If more than one dry contact input RIB shares a single dry contact input, DCI COM must be common.

Data Sheets