The Belimo LMCB24-SR-T is a compact non-spring-return damper actuator delivering 45 in-lb [5 Nm] of torque with modulating 2-10 VDC control on AC/DC 24 V power. It direct-couples to round or square damper shafts from 1/4 in. to 5/8 in. (up to 3/4 in. with an accessory clamp) and is non-fail-safe, with no spring return, making it a proven member of the LMB platform for small to mid-size commercial HVAC dampers. It runs 90° of travel in a fast 35 seconds. Field wiring is via a screw-terminal strip (26-14 AWG).
Specifications sourced from the official Belimo LMCB24-SR-T technical data sheet (rev 2025-10-06).
Overview
Belimo LM-Series actuators are compact non-spring-return drives for small and mid-size commercial HVAC dampers — they position the damper under power and have no spring-return fail-safe function. The LMCB24-SR-T produces 45 in-lb [5 Nm] and mounts directly to round or square damper shafts from 1/4 in. to 5/8 in. (up to 3/4 in. with an accessory clamp). It completes 90° of travel in a fast 35 seconds. A 2-10 VDC (or 4-20 mA with the ZG-R01 resistor) signal modulates the damper, with 2-10 VDC position feedback.
Best for
- Modulating damper control without fail-safe return
- Small to mid-size damper and louver positioning (45 in-lb)
- Direct shaft mount, 1/4-5/8 in. (to 3/4 in. with accessory clamp)
- Faster actuation (35-second run time)
- Installations that prefer screw-terminal wiring
Key Features
Non-Spring-Return Design
No fail-safe spring return. Belimo does not publish a defined position on loss of power for this model; specify a spring-return actuator where a fail-safe position is required.
45 in-lb Torque
Sized for small and mid-size dampers; direct-couples to round or square damper shafts from 1/4 in. to 5/8 in. (up to 3/4 in. with an accessory clamp).
Modulating 2-10 VDC
Accepts a 2-10 VDC (or 4-20 mA with ZG-R01) signal with 2-10 VDC position feedback.
Fast 35-Second Run Time
Drives 90° of travel in about 35 seconds — faster actuation without a spring return.
Screw-Terminal Wiring
Field wiring lands on a screw-terminal strip (26-14 AWG) instead of a pre-wired cable.
cULus Listed & Quiet
cULus listed, ISO 9001 built, UL 2043 plenum-rated for long, maintenance-free service.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Belimo |
| Part Number | LMCB24-SR-T |
| Actuator Type | Non-Spring-Return (Non Fail-Safe) Damper Actuator |
| Nominal Voltage | AC/DC 24 V |
| Nominal Frequency | 50/60 Hz |
| Power Consumption (Running) | 1.5 W |
| Transformer Sizing | 3 VA |
| Torque | 45 in-lb [5 Nm] |
| Control Signal | Modulating |
| Operating Range (Y) | 2-10 VDC (4-20 mA with ZG-R01 resistor) |
| Position Feedback (U) | 2-10 VDC (max. 0.5 mA) |
| Shaft Range | 1/4 in. to 5/8 in. (to 3/4 in. with accessory clamp) |
| Angle of Rotation | Max. 95° (adjustable mechanical stop) |
| Running Time (Motor) | 35 s / 90° |
| Running Time Note | constant, independent of load |
| Sound Power Level (Motor) | 45 dB(A) |
| Behavior on Power Loss | Non fail-safe — no fail-safe spring return function |
| Manual Override | External push button |
| Direction of Motion | Selectable with 0/1 switch |
| Electrical Connection | Screw terminal strip (26-14 AWG) |
| Overload Protection | Electronic, full 0-95° rotation |
| Power Source | UL Class 2 Supply |
| Enclosure Rating | NEMA 1 / UL Type 1 |
| Ambient Temperature | -22 to 122°F [-30 to 50°C] |
| Agency Listing | cULus (UL60730-1A / -2-14, CAN/CSA) |
| Quality Standard | ISO 9001 |
| Plenum Rated | UL 2043 (suitable for air plenums) |
| Weight | 1.2 lb [0.55 kg] |
| Warranty | 5 Years |
Documentation
Related Products
Accessories & Mounting
Common Belimo accessories for mounting, linkage, signaling and powering the LMCB24-SR-T, drawn from the actuator datasheet. All are stocked by ZOT Supply as an authorized Belimo distributor.
Mounting & Linkage
Electrical Add-Ons
Enclosures & Weather Shields
Frequently Asked Questions
What is the Belimo LMCB24-SR-T?
The Belimo LMCB24-SR-T is a compact non-spring-return (non-fail-safe) damper actuator for commercial HVAC. It produces 45 in-lb [5 Nm] of torque, uses modulating 2-10 VDC control on AC/DC 24 V power. It is non-fail-safe: Belimo does not publish a defined position on loss of power for this model. Its housing is rated NEMA 1.
Is the LMCB24-SR-T a spring-return (fail-safe) actuator?
No. The LMCB24-SR-T is non-spring-return: it has no fail-safe spring, so it will not drive to a predetermined position when power is lost. Where a defined position on power loss is required, select a spring-return actuator sized to the damper manufacturer's specifications.
What happens to the LMCB24-SR-T when power is lost?
There is no spring return, so the actuator does not drive itself to a fail-safe position. Belimo's datasheet for this model does not publish a defined power-loss position; if your sequence depends on a specific position during a power failure, specify a spring-return actuator.
What shaft sizes does the LMCB24-SR-T fit?
It direct-couples to round or square damper shafts from 1/4 in. to 5/8 in. (up to 3/4 in. with an accessory clamp) using its universal clamp.
What control signal does the LMCB24-SR-T use?
It uses modulating 2-10 VDC control. The 2-10 VDC input also accepts 4-20 mA with the ZG-R01 resistor and provides 2-10 VDC feedback.
What is the running time of the LMCB24-SR-T?
Motor running time is 35 s / 90°. That faster run time suits applications needing quicker damper response.
What does the -T in LMCB24-SR-T mean?
The -T denotes a screw-terminal strip for field wiring (26-14 AWG) in place of the pre-wired cable and conduit connector. Other specifications are not identical — LMCB24-SR-T and LMCB24-SR differ on enclosure rating NEMA 1 vs NEMA 2; weight 1.2 lb vs 0.98 lb. Verify against the exact -T model datasheet before substituting.
Is the Belimo LMCB24-SR-T available from an authorized Belimo distributor?
Yes. ZOT Supply is an authorized Belimo distributor and carries the LMCB24-SR-T. Every unit ships factory new with Belimo's full 5-year warranty and application support.
- Actuator Type:
- Non-Fail-Safe
- Torque:
- 45 in-lb
- Control Signal:
- Modulating
- Voltage:
- 24 VAC/DC
- Auxiliary Switch:
- No
- Series:
- LM
- Feedback Signal:
- 2-10 VDC
