PS12HD-C-D-N-T — PowerScout 12 HD Multi-Circuit Power Submeter
The Dent Instruments PS12HD-C-D-N-T is the PowerScout™ 12 HD, DENT's networked 12-channel, three-phase submeter. The PS12HD-C-D-N-T measures voltage, current, power, energy, and many other electrical parameters on any combination of single- and three-phase loads — up to 4 three-phase or 12 single-phase circuits — and can network with other PowerScout HD meters to cover multiple loads across a facility.
Looking ahead? The PowerScout FLEX 12 is DENT's next-generation replacement for the PowerScout HD — faster commissioning with FLEXPoint™, browser-based FLEXPoint™ GO, flexible Virtual Meters, and 7.2 kHz sampling.
See the PowerScout FLEX 12 →The PS12HD-C-D-N-T delivers revenue-grade performance with 1.8 kHz sampling, a 1-second update rate, and ANSI C12.20-2010 Class 0.2 accuracy (depending on CT). It supports both Modbus (SunSpec IEEE-754) and BACnet over RS-485 or Ethernet, includes four digital pulse inputs, and provides a 12 VDC auxiliary output. DENT's patented PhaseChek™ circuitry (U.S. Patent 7,612,552) confirms correct CT orientation during commissioning.
This model is TOU (Time-of-Use) enabled: the PS12HD-C-D-N-T tracks energy against tariff schedules using ViewPoint HD, supporting up to 3 tariffs, 6 schedules, and 4 seasons with holiday handling, and stores accumulated kWh and peak kW per tariff (with reset timestamps) for accurate, schedule-aware cost recovery.
Built as a UL-Listed ABS enclosure, the PS12HD-C-D-N-T is delivered in the Enclosure (Case) with Display configuration with a high-voltage cover and is configured through ViewPoint HD PC software or a web browser. It operates as an endpoint reporting to a building management system, RTU, data acquisition device, or DENTCloud™ host.
Best for
- High-density tenant and accountability submetering — up to 12 circuits from one device
- Bi-directional metering and demand-response monitoring
- Real-time power monitoring of building mains and equipment loads
- Tariff-aware cost recovery across peak, off-peak, and seasonal rates
- Projects requiring Made in USA / BAA / TAA equipment
Key Features
Time-of-Use (TOU) Enabled
The PS12HD-C-D-N-T tracks energy against utility tariff schedules in ViewPoint HD — up to 3 tariffs, 6 schedules, and 4 seasons with holiday handling — and reports accumulated kWh and peak kW per tariff with reset timestamps.
Revenue-Grade Accuracy + PhaseChek™
The PS12HD-C-D-N-T meets ANSI C12.20-2010 Class 0.2 revenue-grade accuracy (dependent on CT) with NIST-traceable calibration, and patented PhaseChek™ circuitry (U.S. Patent 7,612,552) flags mis-phased or backwards CTs during commissioning.
Dual-Protocol + 4 Pulse Inputs
The PS12HD-C-D-N-T communicates over Modbus (SunSpec IEEE-754) or BACnet using RS-485 or Ethernet (Modbus RTU, BACnet MS/TP, Modbus TCP, or BACnet IP) and adds four digital pulse inputs for gas, water, or other meters.
12 Channels, One Device
Meter up to 4 three-phase or 12 single-phase circuits across two voltage references from a single PS12HD-C-D-N-T, reducing hardware and panel space versus single-circuit meters.
ViewPoint HD Setup
Configure the PS12HD-C-D-N-T from ViewPoint HD or a web browser, scan the network to find and name every PowerScout HD meter, and pre-build configuration templates — even without the meter on hand — for fast, repeatable deployment.
Universal CT Compatibility
Use the PS12HD-C-D-N-T with DENT 333 mV Split Core or RōCoil™ (Rogowski) CTs, including revenue-grade options, measuring up to 4000 A depending on the CT selected.
Technical Specifications
| Specification | PS12HD-C-D-N-T |
|---|---|
| Model / Part Number | PS12HD-C-D-N-T |
| Series | PowerScout 12 HD (12-channel, 3-phase) |
| Channel Capacity | Up to 4 three-phase or 12 single-phase circuits |
| Service Type | Single Phase, Three Phase-Four Wire (WYE), Three Phase-Three Wire (Delta) |
| Power | From L1 Phase to L2 Phase. 90-600 VAC RMS, CAT III, 50/60 Hz, 500 mA AC Max |
| Auxiliary Power Out | Unregulated 12 VDC, 200 mA, self-resetting fuse (requires 100 VAC minimum input) |
| AC Protection | 0.5 A fuse, 200 kA interrupt capacity |
| Voltage Channels | 90-346 VAC Line-to-Neutral, 600 V Line-to-Line, CAT III |
| Current Channels | 12 channels, 0.525 VAC max, 333 mV CTs, 0-4000 A depending on CT |
| Maximum Current Input | 150% of CT rating (mV CTs) to maintain accuracy; up to 4000 A with RōCoil CTs |
| Pulse Inputs | 4 inputs, 3.3 V sourcing (current limited) to a dry-contact pulse output; max 10 Hz (50 ms min transition) |
| Measurement Type | True RMS using high-speed DSP with continuous sampling |
| Accuracy | 0.2% — ANSI C12.20-2010 Class 0.2; NIST traceable calibration |
| Resolution | 32-bit IEEE-754 single-precision floating point |
| Line Frequency | 50/60 Hz (45-70 Hz measurable range); measured L1-N |
| Waveform Sampling | 1.8 kHz |
| Parameter Update Rate | 1.0 second |
| Time-of-Use (TOU) | Up to 3 tariffs, 6 schedules, and 4 seasons with holiday handling via ViewPoint HD; per-tariff accumulated kWh and peak kW with reset timestamps |
| Measurements | Volts, Amps, kW, kVAR, kVA, aPF, dPF, kW demand, kVA demand, Import/Export/Net kWh, kVAh and kVARh, THD, Theta, Frequency — per phase and element total |
| Display | 4-line LCD with tri-color backlight |
| Communications Hardware | RS-485, Ethernet, and USB (USB for configuration only) |
| Supported Protocols | Modbus RTU, BACnet MS/TP, Modbus TCP or BACnet IP (Modbus based on SunSpec IEEE-754) |
| Communication Rate | 9600 (default), 19200, 38400, 57600, 76800, 115200 baud |
| Max Communication Length | 1200 m at 100K bits/second or less |
| Alarm Output | Undervoltage (open collector, 30 VDC max) |
| Web Page Security | 2 levels of PIN protection (Read/Write or Read-Only) |
| Mounting | Panel mount / self-contained ABS enclosure with six 1 in EMT conduit connections |
| High-Voltage Cover | High-voltage cover, IP30 |
| Enclosure | ABS plastic, 94-V0 flammability rating; 1 in EMT conduit connections |
| Dimensions | 24.8 x 25.1 x 8.0 cm (9.8 x 9.8 x 3.1 in) |
| Wire Connections | 12-28 AWG, 600 VAC; voltage connection must be #14 AWG or larger and 600 VAC rated |
| Operating Temperature | -20 to 60 °C (-4 to 140 °F) |
| Humidity | 5% to 95% non-condensing |
| Certifications | UL Listed (E186827, UL 61010-1 3rd Ed.; CSA C22.2 No. 61010-1); CE (LVD EN61010-1, EMC EN61326-1); RoHS 2 (EN50581); ANSI C12.20 Class 0.2; Made in USA; BAA and TAA compliant |
| Configuration Software | ViewPoint HD (Windows 7 / 8 / 10 / 11) and web browser |
Documentation
- PDF PowerScout 12 HD Data Sheet
- PDF PowerScout HD Operator's Guide
- PDF Quick Start Guide
- PDF Commissioning Checklist
- PDF Declaration of Conformity
- PDF PowerScout to PS HD Migration Guide
- PDF Time-of-Use (TOU) Brochure
Frequently Asked Questions
How many circuits can the PS12HD-C-D-N-T meter?
The PS12HD-C-D-N-T has 12 current channels and can meter up to 4 three-phase or 12 single-phase circuits, networked with other PowerScout HD meters to cover multiple loads across a facility.
What protocols does the PS12HD-C-D-N-T support?
The PS12HD-C-D-N-T supports Modbus RTU, BACnet MS/TP, Modbus TCP or BACnet IP (Modbus based on SunSpec IEEE-754) over RS-485 or Ethernet, plus four digital pulse inputs.
Which current transformers work with the PS12HD-C-D-N-T?
The PS12HD-C-D-N-T uses DENT 333 mV Split Core or RōCoil™ (Rogowski) CTs, including revenue-grade options, and measures up to 4000 A depending on the CT selected.
What is the form factor of the PS12HD-C-D-N-T?
The PS12HD-C-D-N-T is supplied as a UL-Listed ABS enclosure in the Enclosure (Case) with Display configuration, measuring 24.8 x 25.1 x 8.0 cm (9.8 x 9.8 x 3.1 in).
Is the PS12HD-C-D-N-T revenue grade?
The PS12HD-C-D-N-T meets ANSI C12.20-2010 Class 0.2 revenue-grade accuracy, dependent on the CT selected, and ships with a NIST-traceable calibration.
How does Time-of-Use work on the PS12HD-C-D-N-T?
Using ViewPoint HD you can set up to 3 tariffs, 6 schedules, and 4 seasons with holiday handling on the PS12HD-C-D-N-T, then view and reset accumulated kWh and peak kW per tariff with timestamps.
What is the difference between the PS12HD-C-D-N-T and the PowerScout FLEX 12?
The PowerScout FLEX 12 is the next-generation replacement for the PowerScout 12 HD, adding FLEXPoint™ setup tools, browser-based FLEXPoint™ GO, Virtual Meters, and 7.2 kHz sampling. The PS12HD-C-D-N-T remains available; if you are specifying a new system, consider the FLEX 12.
Is the PS12HD-C-D-N-T Made in USA?
Yes. Per the DENT data sheet the PowerScout 12 HD, including the PS12HD-C-D-N-T, is Made in USA and is marked BAA and TAA compliant.
- Brand:
- DENT Instruments
- Series:
- PowerScout 12 HD
- Meter Type:
- 3-Phase Networked
- Current Channels:
- 12
- Mounting:
- Enclosure
- Display:
- Yes
- Connectivity:
- Ethernet and RS-485
- Supported Protocols:
- Modbus RTU, BACnet MS/TP, Modbus TCP or BACnet IP
- Accuracy Class:
- ANSI C12.20-2010 Class 0.2
- Country of Origin:
- Made in USA
- Time of Use:
- TOU Enabled
