EE Controls LSN7-04-H : 4-Pole Lighting Contactor, Normally Closed, 277 VAC 50/60 Hz Coil Voltage, 30A Maximum Amperage Rating Ballast / LED , IEC 60947 / UL 508 / CSA 22.2 #14 Standards
Specifications
| Amperage Rating Ballast / LED 600VAC - Maximum | 30A |
| Number of poles | 4 |
| Configuration | Normally Closed |
| Coil voltage | 277 VAC 50/60 Hz |
The LSN general-purpose contactor series offers a wide array of power devices, accessories, and enclosures to give you greater design versatility. Rated for inductive loads up to 560A or 500hp @ 575VAC (AC-3), EEC's LSN series can offer the most suitable contactor for your application.
Designed to meet growing demands expected from modern IEC frame contactors, the LSN series has been designed with extended mechanical and electical cycles, offer dependable switching and a longer lifespan in even the most heavy-duty applications.The entire range of LSN contactors have been tested and approved to be used under Type 1 and Type 2 short-circuit coordination (Testing Standard below).
- Type 1 - Under short circuit conditions, the contactor or starter shall cause no danger to persons or installation and may not be suitable for further service without repair and replacement parts.
- Type 2 - Under short circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken in regards to equipment maintenance.
EEC's new generation of Lighting Contactors, designed to meet the new demands Lighting Applications (Ballast & LED). The LSN Series adhere to UL508, CSA 22.2 #14 (USA and Canada), as well as IEC 60947 and CE approvals. EEC's lighting contactors are suitable for use throughout the world.
Datasheets
- # of Poles:
- 4
- Coil Voltage:
- 277VAC
- Current Rating:
- 30A
- Configuration:
- Normally Closed
