Functional Devices RIB01P30 : Enclosed Power Relay, 30 Amp Contact Rating, Relay Contact Type: DPST-N/O, 120 Vac Coi Voltagel, NEMA 1 Housing

• Relays & Contact Type: One (1) DPST Continuous Duty Coil
• Expected Relay Life: 10 million cycles minimum mechanical
• Operating Temperature: -30 to 140° F
• Humidity Range: 5 to 95% (noncondensing)
• Operate Time: 18ms
• Relay Status: LED On = Activated
• Dimensions: 4.00" x 4.00" x 1.81" with 0.50" NPT Nipple
• Wires: 16", 600V Rated
• Approvals: UL Listed, UL916, UL864, C-UL, California State Fire Marshal, CE, RoHS
• Housing Rating: Accepted for Use in Plenum, NEMA 1
• Gold Flash: Yes
• Override Switch: No

• 30 Amp Resistive @ 300 Vac
• 25 Amp Resistive @ 28 Vdc
• 20 Amp Ballast @ 277–480 Vac (Not rated for Electronic Ballast)
• 15 Amp Resistive @ 600 Vac
• 770 VA Pilot Duty @ 120 Vac
• 1,158 VA Pilot Duty @ 240 Vac
• 1,110 VA Pilot Duty @ 277 Vac
• 1,640 VA Pilot Duty @ 480 Vac
• Heavy Pilot Duty @ 600 Vac
• 3 HP @ 480–600 Vac
• 2 HP @ 240–277 Vac
• 1 HP @ 120 Vac

Coil Current: 105 mA @ 120 Vac

Coil Voltage Input: 120 Vac; 50–60 Hz (Drop Out = 35 Vac, Pull In = 85 Vac)

Control Wiring: Wht/Blk = 120 Vac Continuous, Wht/Red = 120 Vac Control, Wht/Yel = Neutral

• What does DPST-N/O mean?
  DPST stands for Double Pole Single Throw. Both poles are normally open (N/O), meaning both circuits are closed only when the relay is energized.
• Can the RIB01P30 handle electronic ballasts or LED loads?
  No. The relay is not rated for electronic ballasts and should not be used with LED drivers. For these applications, select a relay rated for electronic loads.
• Are alternate contact configurations available?
  Yes. To order both poles as normally closed, add “-NC” to the model number. For mixed contact operation (Pole 1 N/O, Pole 2 N/C), add “-NONC”.

• Tip: Use the appropriate control lead configuration for either continuous or control-only activation, as listed in the wiring diagram.
• Tip: Mount in a dry, indoor location to maintain NEMA 1 housing compliance.
• Mistake to Avoid: This relay is not designed for electronic loads such as LED drivers or electronic ballasts.