Name: AimSafety 70-2900-0532-2 : PM400 Replacement Battery Pack
Brand: Macurco
SKU: 70-2900-0532-2
Price: 117.19 USD
Availability: InStock

Description
Features

The AimSafety 70-2900-0532-2 is the replacement rechargeable battery pack for the PM400 four-gas portable monitor.

Specifications on this page are taken from the Macurco AimSafety product data workbook and the AimSafety documentation cited below.

Key Features

Designed for the PM400 seriesAimSafety catalogues this pack for use with the PM400. The monitor's published runtime is up to 60 days continuous on the PM400-IR and 24 hours continuous on the PM400-P.

Rechargeable lithium-ionThe PM400 uses a rechargeable 3.7 V lithium-ion pack rather than a disposable cell.

Technical Specifications

Product
Part Number	70-2900-0532-2
Description	PM400 replacement battery pack
Battery Type	Rechargeable 3.7 V lithium-ion
Compatible Monitors	AimSafety PM400-IR and PM400-P
Sold As	Each

Sourcing
Country of Origin	South Korea
ECCN	EAR99

Documentation

PM400 Series Data Sheet

PM400 Multi-Gas Personal Monitor User Manual (Rev. 2.0)

AimSafety Portable Gas Detection Line Card

Related Products

Portable Gas MonitorAimSafety PM400-IR 4-Gas Monitor Portable Gas MonitorAimSafety PM400-P 4-Gas Monitor Bump Test and Calibration StationAimSafety PM400-STN Calibration Station Replacement SensorAimSafety PM400 CO/H2S Sensor Replacement SensorAimSafety PM400 Catalytic Bead Sensor Replacement SensorAimSafety PM400 Infrared LEL Sensor Replacement SensorAimSafety PM400 O2 Sensor, Black Replacement SensorAimSafety PM400 O2 Sensor, Purple Calibration GasAimSafety PM400 Quad Mix Cal Gas, 58L Calibration AccessoryAimSafety PM400 Calibration Hood

Frequently Asked Questions

Which monitors does the 70-2900-0532-2 battery fit?

The PM400 series, covering both the PM400-IR and PM400-P. The PM150-CO2 uses a different battery, part 70-2900-0532-0.

What runtime does AimSafety publish for the PM400?

Up to 60 days of continuous operation on the infrared PM400-IR, and 24 hours of continuous operation on the catalytic bead PM400-P. Those are the monitor's published figures, not a guaranteed result of fitting a replacement pack.

What does Macurco say about replacing the PM400 battery?

Macurco documentation is not consistent on servicing the PM400. The PM400 Series Data Sheet lists field-replaceable sensors and AimSafety catalogues replacement sensors and battery packs by part number, but the PM400 Multi-Gas Personal Monitor User Manual Rev. 2.0 states that the battery and sensor should not be replaced because the PM400 is designed to be disposable, and that changing them may impair intrinsic safety and void the warranty. The PM400 Quick Start Guide states that charging or replacing the battery should be done in a safe area and that using components not authorised by the manufacturer will void the warranty. The manual's maintenance section adds that the unit should not be disassembled, repaired or modified, that only replacement parts from the supplier should be used, and that substituting components may impair intrinsic safety. Confirm the intended service path with Macurco before replacing a sensor or battery on a monitor already in service.