null Skip to main content
AimSafety PM400-STN bump test and calibration station, three-quarter left view

AimSafety PM400-STN : Bump Test and Calibration Station for PM400 Multi-Gas Monitors

Macurco

MSRP: $4,280.00
Your Price:  $4,012.50
(You save $267.50 )
(No reviews yet) Write a Review
SKU:
70-2900-0521-1
UPC:
8.5756E+11
Condition:
New
Availability:
Ships in 3-5 Days
Adding to cart… The item has been added
Capacity4 monitors simultaneously
Compatible WithPM400-IR and PM400-P
Battery Life~1000 bump tests per charge
Weight23 lb. (10.4 kg)
Operating Temp.41-104 °F
Computer RequiredNo

The AimSafety PM400-STN is a bump test and calibration station that tests, calibrates, configures and updates firmware on up to four PM400 four-gas monitors at a time without a computer.

Specifications on this page are taken from the Macurco AimSafety product data workbook, the PM400 Series Data Sheet and the AimSafety line card.

Best For

Fleet operators running PM400 four-gas monitors who need documented daily bump testing and unattended firmware and configuration rollout across a crew, in confined space entry, oil and gas, pipeline compression, refining, chemical production, water and wastewater treatment, food and beverage, metal manufacturing, pulp and paper and power generation.

Key Features

Four PM400 monitors tested at onceThe station bump tests and calibrates up to four PM400 multi-gas units simultaneously, cutting both test time and calibration gas consumption.
Automatic configuration and firmware updateThe station automatically applies PM400 configuration settings and pushes firmware updates to every monitor it docks, keeping a mixed-age fleet on one revision.
Event logging through PC or PM LinkBump, calibration and monitor event logs are retrievable through a connected PC or the PM Link interface.
Roughly 1000 bump tests per battery chargeThe internal rechargeable battery supports approximately 1000 bump tests between charges.
No computer required for normal operationRoutine bump testing and calibration run from the station itself. A computer is only needed for log retrieval and configuration changes.
Rugged transportable caseThe station is built into a rugged case at 23 lb. (10.4 kg), so it can be moved to the crew rather than the crew to it.

Technical Specifications

Function
Functions PerformedBump test and calibration
CapacityUp to four PM400 monitors simultaneously
Compatible MonitorsAimSafety PM400-IR and PM400-P
ConfigurationAutomatic update of PM400 configuration and firmware
LoggingEvent logging through PC or PM Link
Power
BatteryRechargeable, approximately 1000 bump tests per charge
Computer RequiredNo, for normal operation
Physical and Environmental
Size20.6 in. x 16.8 in. x 8.1 in. (52.4 x 42.8 x 20.6 cm)
Weight23 lb. (10.4 kg)
ColorBlack
Operating Temperature41 to 104 °F (5 to 40 °C)
Country of OriginSouth Korea
ECCNEAR99

Documentation

PDFPM400 Series Data Sheet
PDFPM400 Multi-Gas Personal Monitor User Manual (Rev. 2.0)
PDFPM Link PC Interface User Instructions (Rev. 1.0)
PDFAimSafety Portable Gas Detection Line Card

Related Products

Portable Gas MonitorAimSafety PM400-IR 4-Gas MonitorPortable Gas MonitorAimSafety PM400-P 4-Gas MonitorReplacement SensorAimSafety PM400 CO/H2S SensorReplacement SensorAimSafety PM400 Catalytic Bead SensorReplacement SensorAimSafety PM400 Infrared LEL SensorReplacement SensorAimSafety PM400 O2 Sensor, BlackReplacement SensorAimSafety PM400 O2 Sensor, PurpleCalibration GasAimSafety PM400 Quad Mix Cal Gas, 58LCalibration AccessoryAimSafety PM400 Calibration HoodReplacement PartAimSafety Monitor Belt ClipChargerAimSafety PM400 Vehicle Charger

Frequently Asked Questions

Which monitors does the AimSafety PM400-STN work with?

The PM400-STN is the bump test and calibration station for the PM400 series, covering both the PM400-IR infrared and PM400-P catalytic bead models. PM100 single-gas monitors use the separate PM100-STN.

How many PM400 monitors can the station handle at once?

Four. The station bump tests and calibrates up to four PM400 multi-gas units simultaneously.

Does the PM400-STN update firmware?

Yes. It automatically updates PM400 configuration and firmware on the monitors it docks, so a fleet stays on a single revision without individual PC sessions.

Which calibration gas does the PM400-STN use?

The PM400 quad mixture cylinder, part 37-0551-3344-2, supplying CO 100 ppm, H2S 25 ppm, CH4 50 % LEL and O2 18 % by volume in a 58L cylinder.

Does the PM400-STN need a computer?

Not for normal operation. A computer or the PM Link interface is used for event log retrieval and configuration changes.

Product Type:
Bump Test and Calibration Station
Compatible Series:
PM400
Capacity:
4 Monitors
Compatible Gases:
CO / H2S / O2 / LEL
Power Source:
Rechargeable Battery
Computer Required:
No
!