null Skip to main content
AimSafety PM100-STN bump test and calibration station, front view

AimSafety PM100-STN : Bump Test and Calibration Station for PM100 Single-Gas Monitors

Macurco

MSRP: $4,120.00
Your Price:  $3,862.50
(You save $257.50 )
(No reviews yet) Write a Review
SKU:
70-2900-0522-1
UPC:
8.5756E+11
Condition:
New
Availability:
Ships in 3-5 Days
Adding to cart… The item has been added
Capacity4 monitors simultaneously
Compatible WithPM100 CO, H2S and O2
Battery Life~1000 bump tests per charge
Log CapacityUp to 10 million tests
Weight23 lb. (10.4 kg)
Warranty2 years

The AimSafety PM100-STN is an all-in-one bump test and calibration station that tests, configures and updates firmware on up to four PM100 single-gas monitors at a time without a computer, using the infrared communication link built into the monitors.

Specifications on this page are taken from the PM100 Bump Test and Calibration Station V2 User Instructions Rev. 1.0, the PM100 Series Data Sheet and the AimSafety line card.

Best For

Fleet operators running PM100 CO, H2S or O2 monitors who need documented daily bump testing and printable calibration certificates without tying up a laptop, across oil and gas, pipeline compression, refining, water and wastewater treatment, food and beverage, metal manufacturing, pulp and paper and power generation.

Warranty

Two year limited warranty. The PM100 Bump Test and Calibration Station V2 user instructions publish a two-year warranty term for the station.

Key Features

Four monitors tested, configured and updated at onceThe station simultaneously bump tests, calibrates, applies settings and updates firmware on four PM100 monitors, which cuts both test time and gas consumption.
No computer required for normal operationThe whole station is driven by two buttons. A PC is only needed to download calibration certificates for printing or to change station configuration.
Roughly 1000 bump tests per battery chargeThe internal rechargeable lithium-ion battery supports approximately 1000 bump tests between charges, so the station travels to the crew rather than the other way round.
Printable calibration certificatesThe station stores calibration certificates alongside bump and calibration logs and individual monitor event logs, retrievable over PM Link or the supplied USB flash drive.
8 GB removable log storageA standard 8 GB USB flash drive holds up to approximately 10 million test records, together with firmware and unit configurations.
Internal regulator and pressure gaugeThe station has a built-in gas cylinder regulator and pressure gauge and accepts 58L, 103L and 116L cylinders with C10 fittings.

Technical Specifications

Function
Functions PerformedBump test and calibration
CapacityUp to four PM100 monitors simultaneously
Compatible MonitorsPM100-CO, PM100-H2S and PM100-O2
ControlsTwo-button operation
Information StoredBump and calibration logs, individual monitor event logs, calibration certificates, firmware and unit configurations
Log CapacityApproximately up to 10 million tests with the 8 GB removable USB memory
MemoryUSB 8 GB standard
Gas Supply
Gases AvailableFour-gas mix (CH4, CO, H2S, O2)
Gas Cylinder Compatibility58L, 103L and 116L cylinders with C10 fittings
RegulatorInternal gas cylinder regulator and pressure gauge
Power
Battery TypeRechargeable lithium-ion
Battery LifeApproximately 1000 bump tests per charge
Charging Adaptor12 VDC at 3 A
LEDs6 blue LEDs per bay, 1 red / orange / green power indicator
Physical and Environmental
Size20.62 in. x 16.87 in. x 8.12 in. (52.4 x 42.8 x 20.6 cm)
Weight23 lb. (10.4 kg) without cylinder
Operating Temperature41 to 104 °F (5 to 40 °C)
Country of OriginSouth Korea
ECCNEAR99

Documentation

PDFPM100 Bump Test and Calibration Station V2 User Instructions
PDFPM100 Series Data Sheet
PDFPM100 Personal Single-Gas Monitor User Manual (Rev. 3.0)
PDFPM Link PC Interface User Instructions (Rev. 1.0)
PDFAimSafety Portable Gas Detection Line Card

Related Products

Portable Gas MonitorAimSafety PM100-CO Single-Gas MonitorPortable Gas MonitorAimSafety PM100-H2S Single-Gas MonitorPortable Gas MonitorAimSafety PM100-O2 Single-Gas MonitorCalibration AccessoryAimSafety PM100/150 Calibration HoodReplacement PartAimSafety PM100/150 Sensor Filters, 20-PackReplacement PartAimSafety Monitor Belt ClipReplacement PartAimSafety Station Straps, 3-PackChargerAimSafety Station ChargerPC InterfaceAimSafety PM Link PC CommunicatorSampling AccessoryAimSafety PM-APK Aspirating Pump Kit

Frequently Asked Questions

Which monitors does the AimSafety PM100-STN work with?

The PM100 bump test and calibration station is published as compatible with the CO, H2S and O2 PM100 models. It is not published as compatible with the NH3, SO2, NO2 or H2 models, or with the PM400 series, which uses the separate PM400-STN.

How many monitors can the PM100-STN test at once?

Four. The station bump tests, calibrates, configures settings and updates firmware on up to four PM100 monitors simultaneously.

Does the PM100-STN need a computer?

Not for normal operation. Bump testing and calibration are driven by two buttons on the station itself. A computer running the Station Manager software is only needed to download calibration certificates for printing or to change station configuration.

Which gas cylinders fit the PM100-STN?

58L, 103L and 116L cylinders with C10 fittings. The station has an internal regulator and pressure gauge, so an external fixed-flow regulator is not required.

How long does the PM100-STN battery last?

The internal rechargeable lithium-ion battery supports approximately 1000 bump tests on a single charge.

What is the operating temperature range of the PM100-STN?

41 to 104 °F (5 to 40 °C). Macurco warns that the station may not function effectively outside this range.

Product Type:
Bump Test and Calibration Station
Compatible Series:
PM100
Capacity:
4 Monitors
Compatible Gases:
CO / H2S / O2
Power Source:
Rechargeable Li-ion
Computer Required:
No
!