Name: AimSafety 70-2900-0536-8 : PM Link PC Communicator, Infrared to USB, for PM100, PM400 and PM500
Brand: Macurco
SKU: 70-2900-0536-8
Price: 210.94 USD
Availability: InStock

Description
Features

The AimSafety PM Link PC Communicator, part 70-2900-0536-8, is the infrared-to-USB PC interface used to configure compatible PM100, PM400 and PM500 gas monitors, and to calibrate and download logs from PM100 and PM400 monitors.

Specifications on this page are taken from the Macurco AimSafety product data workbook and the AimSafety documentation cited below.

Key Features

Configures alarm set points and policiesPM Link and its Windows software set user ID, display, stealth and self-test options, low and high alarm levels, calibration concentration, calibration time and the calibration and bump intervals.

Performs zero and span calibrationBoth zero and span calibration of PM100 and PM400 monitors are run from the PM Link software.

Downloads event and data logsPM100 event logs and PM400 event and data log files are viewed, downloaded and erased through the software.

Pushes firmware upgradesThe software includes a firmware upgrade path for connected monitors.

Connects over a standard USB portThe PM Link hardware presents a Mini-USB port and connects to any available USB port on the computer.

Technical Specifications

Product
Part Number	70-2900-0536-8
Description	PM Link PC interface, infrared to USB
Compatible Monitors	AimSafety PM100 series, PM400 series and PM500 series
Computer Connection	USB
Device Port	Mini-USB
Monitor Link	Infrared
Weight	1.6 oz. (45 g)
Size	1.5 in. x 2 in. x 0.6 in. (3.8 x 5 x 1.5 cm)
Operating Temperature	41 to 104 °F (5 to 40 °C)
Sold As	Each

Sourcing
Country of Origin	South Korea
ECCN	EAR99

Documentation

PM Link PC Interface User Instructions (Rev. 1.0)

PM100 Series Data Sheet

PM400 Series Data Sheet

AimSafety Portable Gas Detection Line Card

Related Products

Portable Gas MonitorAimSafety PM400-IR 4-Gas Monitor Portable Gas MonitorAimSafety PM400-P 4-Gas Monitor Portable Gas MonitorAimSafety PM100-CO Single-Gas Monitor Replacement SensorAimSafety PM400 CO/H2S Sensor Replacement SensorAimSafety PM400 Catalytic Bead Sensor Replacement SensorAimSafety PM400 Infrared LEL Sensor Replacement SensorAimSafety PM400 O2 Sensor, Black Replacement SensorAimSafety PM400 O2 Sensor, Purple Calibration GasAimSafety PM400 Quad Mix Cal Gas, 58L Calibration AccessoryAimSafety PM100/150 Calibration Hood

Frequently Asked Questions

What does the AimSafety PM Link do?

It is the PC interface for PM100 and PM400 monitors. It configures alarm set points and policy settings, performs zero and span calibration, downloads and erases event and data logs, and pushes firmware upgrades.

Which monitors work with PM Link?

The AimSafety PM Link PC Communicator is used to configure compatible PM100, PM400 and PM500 gas monitors. It is listed in the PM500 data sheet accessory table under this same part number. The PM150-CO2 is not configured through PM Link; it uses its own charger connection and PC software.

Can PM Link be used in a hazardous area?

No. Macurco warns that the PM Link has no intrinsic safety rating and that configuring a monitor with it in a hazardous environment can cause an explosion. Use it only in a safe area.

What software does PM Link need?

The AimSafety PM Link Windows software, downloaded from the Macurco downloads page. Windows 8 and later normally do not require a separate driver install.