The AimSafety 70-2900-0531-1 is the bump test and calibration hood for the PM100 single-gas and PM150-CO2 monitors. It seals over the sensor face so calibration gas can be applied at a controlled flow.
Specifications on this page are taken from the Macurco AimSafety product data workbook and the AimSafety documentation cited below.
Key Features
Technical Specifications
| Part Number | 70-2900-0531-1 |
|---|---|
| Description | PM100 / PM150 bump / calibration hood |
| Compatible Monitors | AimSafety PM100 series and PM150-CO2 |
| PM150 Calibration Flow Rate | 0.2 LPM (N2, CO2) |
| Sold As | Each |
| Country of Origin | South Korea |
|---|---|
| ECCN | EAR99 |
Documentation
Related Products
Frequently Asked Questions
Which monitors does the 70-2900-0531-1 hood fit?
The PM100 single-gas family and the PM150-CO2. The PM400 four-gas monitors use a different hood, part number 70-2900-0532-3.
What flow rate should be used with the PM150-CO2?
The PM150-CO2 user manual specifies a calibration flow rate of 0.2 LPM for nitrogen and carbon dioxide.
Is this hood needed if a PM100-STN station is in use?
No. The PM100-STN docking station applies gas internally. The hood is for manual bump testing and calibration with a cylinder and regulator.
- Product Type:
- Calibration Accessory
- Accessory Type:
- Calibration Hood
- Compatible Series:
- PM100
- Compatible Series:
- PM150
- Sold As:
- Each
